Secondary batteries contain cathode materials such as lithium nickel cobalt manganese oxide, lithium manganese oxide, lithium cobalt oxide, nickel hydride powder, and lithium iron phosphate, alongside auxiliary materials including copper, iron, aluminium,[more]

After digestion of the sample with aqua regia, the cadmium, lead and chromium in the sample solution are atomised in the ICP light source and excited to a high-energy state.[more]

The sample is digested using a mixture of sulphuric acid and nitric acid until the solution becomes clear, then made up to volume with water, and the content is determined by ICP-AES.[more]

Introduction: The existence of some trace metal elements in crude oil has adverse effects on petroleum processing, storage and transportation process and environmental protection. Therefore, the type and content of harmful element[more]

Inductively coupled plasma mass spectrometry, known as "ICP-MS technique", can identify multiple elements in samples at the same time.[more]

This method is suitable for the determination of lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium ox[more]

The existence of some trace metal elements in crude oil has adverse effects on petroleum processing, storage and transportation process and environmental protection.[more]

According to SH/T 0749-2004 lubricating oil and additives content determination method of added elements(Inductively coupled plasma emission spectrometry)，determination of metal element content in lubricating oil：[more]

The ICP light source generated in the ICP spectrometer torch tube has three observation methods: radial observation，axial observation and DUO observation . Let's have an analysis about it.[more]

The ICP6810 full-spectrum direct-read inductance-coupled plasma emission spectrometer, with excellent resolution, test accuracy and precision, is widely used in the rare earth industry, chemical industry, andOre analysis, metal smelting, geological resear[more]

Preface:The general classification of zinc oxide: the general industrial grade of zinc oxide is mainly divided into three kinds (pharmaceutical grade temporarily not mentioned) indirect method of zinc oxide (content 99.5-99.7),[more]

The problem of heavy metal pollution in water is becoming more and more serious. Scientific and accurate analysis of heavy metals in water has become an essential task of environmental monitoring.[more]

With the development and application of metal products, it is closely related to human production and life. Therefore, more and more stringent testing standards and requirements are put forward for products and raw materials.[more]

Vanadium is a non-ferrous metal. Vanadium pentoxide is widely used in metallurgy, chemical industry and other industries, mainly for smelting ferrovanadium. It is used as alloy additive, accounting for more than 80% of the total consumption[more]